- Remote Control[53]
- Alarm[25]
- Sports Shoes[30]
- Wireless Networking Equipment[2]
- Remote Control Switches[10]
- Other Accessories & Parts[2]
- Smoke Detector[10]
- Other Safety Products[3]
- Other Security & Protection Products[5]
- Sensors[2]
- Other Switches[1]
- Wall Switches[2]
- Repeater[1]
- Other Access Control Products[3]
- Electrical Plugs & Sockets[2]
- Contact Person : Mr. Cheng Vincent
- Company Name : Shenzhen Kelvin Electronics Co., Ltd.
- Tel : 86-755-89673076
- Fax : 86-755-89673457
- Address : Guangdong,Shenzhen,Floor 3, Block Seven, Huaxing Industry District, Shilongkeng Village, Shuijing, Buji Street,Longgang district,Shenzhen,China
- Country/Region : China
- Zip : 518112
4-channel wireless remote control switch with wireless transmitter
4-channel wireless remote control switch with wireless transmitter
KL-K400C Specification & user manual
Technical parameters:
12V Quad Power Controller KL-K400C
Working current: 8mA
Working voltage: DC12V
Operating Frequency: 266-433MHZ
Receiver sensitivity: -95db
The encoding type: learning type
Working mode: non lock, interlocking, self-locking( adjusted by jumper hat)
Maximum load: 7A
Size 49 * 69 * 20MM
USER MANUAL
KL-K400C 4 Channel Remote Control Switch With Remote Control
1. Programming
Press learning key for 3s, the indicator light flashes, then press any button of the remote control, the indicator LED goes off, the remote is set. Up to 20 remote controls can be paired.
2. Deleting the remote control memory
Press the learning key for 3 Seconds until indicator LED fades, then then release, Memory is now deleted.
3.Output mode
Unlocking, self-locking and interlocking. S1 & S2 program the sequence as follows: S1→ self-locking
S2→ interlocking
No Jumper on S1 &S2→ Unlocking
4. Wiring
On the back of receiver board marks: K, G, and B
K is normal open connector
G is Common connector
B is Normally closed connector.
5. Modes
1) Self lock model
Press remote button A , the receiver relay is on, press button A again the receiver relay is off, the same as B/C/D.
Extend function:
(When jumper is off position) press A on the transmitter, receiver A goes on 2 seconds, then goes off automatically, same of B/C/D.
2) Non lock model
Press remote button A, the receiver relay is on, release button A; the receiver relay is off, the same as B/C/D.
3) Interlock model
Press remote button A, the receiver relay A is on, the relay B/C/D is off.
Press remote button B, the receiver relay B is on, the relay A/C/D is off.
Press remote button C, the receiver relay C is on, the relay A/B/D is off
Press remote button D, the receiver relay D is on, the relay A/B/C is off.
4-channel wireless remote control switch with wireless transmitter
